Re: Field Day Safety and other questions

Paul Butzi (W7PFB)

I’d be happy to crimp Anderson Powerpoles onto the end of your 7300 power cable for you.  It only takes a few minutes.  I’ll do better than that, actually, and teach you to do it.

I’ve got approximately 5 trillion connectors on hand, because I standardized on powerpoles for all my gear and so I often need to put connectors on various random power cords.  Ok, maybe 5 trillion is a slight exaggeration.  Maybe it’s just a few dozen.

Have you tried plugging the wall wart into the 120VAC socket on the Bioenno power pack?  The specs say it’s good up to 100 watts, which is likely more than your laptop needs.

-p W7PFB
73, Don’t forget to smile and have fun!

On Jun 17, 2018, at 5:04 PM, Robin Amundson <wa7cpa@...> wrote:

Thanks for the loan of the battery, Paul. The end of the 7300 power cable has separate red wire and a black wire attached to the back of my desktop power supply. No power poles as supplied out of the box. My power supply does have powerpole socket which I use with my KX3 power connection. Workbench solution someone?

Also, my laptop just does not run off any battery, only the wall wart. My bad when I bought it reburbished for $300 from Newegg. I was naive and inattentive and should have sent it back. Too late now. Getting one that will work on a battery is on my list.

Tnx and 73,

On Sun, Jun 17, 2018 at 4:36 PM, Paul Butzi (W7PFB) <w7pfb@...> wrote:

> 2. Need a battery/power supply for my new IC-7300--unless the group considers it okay to use my Powerwerx power supply that will require commercial power. Who has a battery to lend to the FD effort? It needs DC 13.8V/25A (Capacity at least 21 amps).  I am just trying to set up this rig on my shack desk and figure out how to run it. I have not had time to order a field battery. My 2 Bioennos were acquired for my 15 watt rig and are insufficient for the 7300.

I have a Group U1 lead acid battery (capacity 35AH) in a battery box I can loan to the effort.  I’ll make sure it’s charged up.  Voltmeter built in and powerpole connections.

> 3. Who can bring up a laptop with N1MM software installed for logging at the IC-7300 GOTA station?
> I will also be needing commercial power for my laptop for the KX3. Its internal battery does not work, even with a brand new one. So, I think our category is firmly A-Commercial. We were A-Commercial last year, I believe. It has all my logging and FT-8 software installed, so a swap is definitely not feasible.

You could run the laptop off a battery and inverter.  Doesn’t your cool Bienno battery thing have 120VAC output?

-p W7PFB
73, Don’t forget to smile and have fun!

Join to automatically receive all group messages.