Re: Mobile rig antennas - advice and tips welcomed


Here are pics of my F350 and Explorer installs.  They both work great.  I did have a mag mount on p/u for several years but had a tree branch blow it off the top of my truck and destroy it.




On Mon, May 4, 2020 at 11:06 AM Jason Frazier <frazierjason@...> wrote:
I have my my V/u antenna mounted in the same place, hood next to A-pillar.  Note that if you have a 2015 or newer F-150 you must look for an aluminum bar with isolation washer and special stainless screw, to prevent galvanic corrosion on either the aluminum body or steel frame.  I found mine easily on Amazon.

A-pillar position has worked well for me, certainly better than mag-mounting the same antenna on my other vehicle.

73 de Jason W7DM

-------- Original message --------
From: Mark McClain <n6oby@...>
Date: 5/4/20 10:44 (GMT-08:00)
Subject: Re: [SnoVARC] Mobile rig antennas - advice and tips welcomed

I have also had pretty good luck with front fender/hood mounted antennas. 


I did some experimentation on a Chrysler minivan I had many years ago with two different mounts on the drivers side.  One was back close to the column (pillar) and the other was forward near the nose.  My testing showed a noticeable difference between the two and the forward-mounted antenna did better when testing to a repeater that was behind the van.  So you might want to give some consideration to how close to your pillar it is mounted.





From: <> On Behalf Of Jackson Beard via
Sent: Monday, May 4, 2020 9:07 AM
Subject: Re: [SnoVARC] Mobile rig antennas - advice and tips welcomed


I use a hood mount designed for my Ram, and it works just fine. I can hit the repeater from Skagit and Lewis counties.


They make a hood mount for your truck too.


On Mon, May 4, 2020, 09:03 Mike Jacob <golferguy02@...> wrote:

Well, I'm finally getting ready to put a mobile rig into my truck.

I am pretty sure I've settled on a Kenwood TM-V71A. 

I'd love to get your opinions and any pics you want to share about antenna mounting, models and performance you wish to share.

Some details about my rig:
Toyota truck

I use a canopy for several months a year so mounting on the inside edge of the bed rail is not going to work. 

I know that a roof mount is probably best for performance, but I'm hesitant to put on there as I'll likely break it off going into the parking garages near work as they have short clearances. (and I'll surely forget to lower it every time).
This is making me think a hood mount is the next best option.  It doesn't necessarily provide the best ground plane.  Does anyone have a hood mounted antenna and do you get "good enough" performance? 

I'm thinking something along the lines of these, but would love feedback or opinions:

Antenna models:


Potential mounting location:  (not my truck) 🙂



Thanks for sharing your opinions and any tips or mistakes to avoid. 

-Mike J



Join to automatically receive all group messages.