Re: Repeater ID question


The software for the Cougar Repeater has been updated to reflect CW: KE7GFZ/R and will be applied the next time there is a need to drive up to the mountain and reprogram the repeater.  Such a minor change does not warrant a special trip.

The Bell Repeater (now located at my QTH) Voice ID was changed quite some time ago to distinguish it from cougar.  It is referred to as the "Amateur Repeater" while cougar is just the "Repeater"  It's CW ID will be changed from /D to /R when cougar is updated.


On 7/30/20 23:20, Dan Pflugrath wrote:

Glendon is correct.  When we moved the original SNOVARC repeater to the Bell's residence we happened to acquire the Cougar Mountain repeater.  While monitoring the activity on both at the same time I wanted a quick way to know which one was active.  The idea came from one of the other repeaters in the building on Cougar mountain where their main repeater was on Tiger mountain and the one on Cougar was the backup.  I can't remember what they used but I think Tiger was /R and Cougar was /C


About a year ago I mentioned to Jim  K7ABD that it should probably be changed to /R unless they use the /C and /D when monitoring both repeaters.


Robin, you are only one of the very few to ask.







From: [] On Behalf Of Glendon Pflugrath
Sent: Thursday, July 30, 2020 9:09 PM
Subject: Re: [SnoVARC] Repeater ID question


If memory serves, Carnation repeater was appended with /C and the Duvall repeater got a /D. Allows means to identify source of the signal you're receiving.

From: <> on behalf of Robin Amundson <wa7cpa@...>
Sent: Thursday, July 30, 2020 8:51:52 PM
To: <>
Subject: [SnoVARC] Repeater ID question


Here is something I have wondered about since I got relicensed, but it never before rose to my consciousness to ask:
Why does the SnoVarc repeater ID in Morse Code with the call sign /C while other repeaters ID /R  ?

Robin, WA7CPA


Top News - Sponsored By Newser

Join to automatically receive all group messages.