Date   

Emergency Procedures

Dale Smith
 

If there were a Cascadia earthquake would formal, or semi-permanent, ad hoc connections be made between HF operators between major cities like Seattle and Portland or SNOvarc and Seattle or Portland, etcetera.  Or, between SNOvarc and FEMA, Other Governmental Agencies, or NGOs?

 

I recall the incident command Elmer class but I do not recall if there were hierarchical pre-panned structures in place.

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 


Re: Best source for T130-2 Toroid Cores?

Howard E. Mahran / WA1HEM
 

Thanks Rowland!

And Lou - My wallet has the same tendency :-) 

***********************************
Howard Mahran
(425) 864-5104
***********************************




On Dec 30, 2019, at 10:27 AM, Lou Giliberto (KD7HCW) via Groups.Io <louis.giliberto@...> wrote:

If you go into vetco watch yor wallet. Mine likes to empty itself, lol


Sent from ProtonMail mobile



-------- Original Message --------
On Dec 29, 2019, 8:46 PM, Rowland < k7rwb@...> wrote:

 
They are located on Northup Way in Bellevue. 12718 Northup Way, Bellevue, WA
 
Thanks,
 
Rowland 
 
From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Howard E. Mahran / WA1HEM
Sent: Sunday, December 29, 2019 6:14 PM
To: snovarc@snovarc.groups.io
Subject: [SnoVARC] Best source for T130-2 Toroid Cores?
 
Going to make some 9:1 unun's - any recommendations for a reliable, decently priced source to purchase several Iron powder Toroid cores (T130-2)?

73's
-- 
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
************************* 



--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Best source for T130-2 Toroid Cores?

Lou Giliberto (KD7HCW)
 

If you go into vetco watch yor wallet. Mine likes to empty itself, lol


Sent from ProtonMail mobile



-------- Original Message --------
On Dec 29, 2019, 8:46 PM, Rowland < k7rwb@...> wrote:

https://vetco.net/search/results?q=toroid+cores

 

They are located on Northup Way in Bellevue. 12718 Northup Way, Bellevue, WA

 

Thanks,

 

Rowland

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Howard E. Mahran / WA1HEM
Sent: Sunday, December 29, 2019 6:14 PM
To: snovarc@snovarc.groups.io
Subject: [SnoVARC] Best source for T130-2 Toroid Cores?

 

Going to make some 9:1 unun's - any recommendations for a reliable, decently priced source to purchase several Iron powder Toroid cores (T130-2)?

73's
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Best source for T130-2 Toroid Cores?

Rowland
 

https://vetco.net/search/results?q=toroid+cores

 

They are located on Northup Way in Bellevue. 12718 Northup Way, Bellevue, WA

 

Thanks,

 

Rowland

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Howard E. Mahran / WA1HEM
Sent: Sunday, December 29, 2019 6:14 PM
To: snovarc@snovarc.groups.io
Subject: [SnoVARC] Best source for T130-2 Toroid Cores?

 

Going to make some 9:1 unun's - any recommendations for a reliable, decently priced source to purchase several Iron powder Toroid cores (T130-2)?

73's
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Best source for T130-2 Toroid Cores?

Howard E. Mahran / WA1HEM
 

Going to make some 9:1 unun's - any recommendations for a reliable, decently priced source to purchase several Iron powder Toroid cores (T130-2)?

73's
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Brain fart ...

Dale Smith
 

Thanks for the link!

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Sunday, December 29, 2019 8:34 AM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

On Dec 28, 2019, at 9:31 PM, Dale Smith <dale_smith@...> wrote:

 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept?  

 

 

Yes, you’re mistaken.  I see how you are interpreting the upper half and lower half as upper sideband and lower sideband but that’s incorrect.

 

The upper half of that graphic (red and green, running from 28.000 to 29.700 MHz), is describing the privileges for licensee whose license is Amateur Extra, Advanced, or General, matching the letters E, A, G to the right 

 

The lower half of that graphic, (red and yellow, running from 28.000 to 28.500 MHz), is describing the privileges for licensees whose license class is Novice or Technician, matching the letters N, T to the right.  The notation “(200 W)” to the right indicates that novice and tech licensees are limited to 200  watts or less on the 10 meter band.

 

The color indicates what mode may be used, see the key on the right edge of the bandplan chart.

 

What the graphic is saying is that 

* Amateur Extra, Advanced, and General class licensees may use RTTY and data modes between 28.000MHz and 28.300 MHz (that’s the red portion of the upper half) , and may use phone and image modes (e.g. SSB voice, AM voice, SSTV, etc.) between 28.300MHz and 29.700 MHz (that’s the green portion).

* Novice and Technician class licensees may use RTTY and data modes between 28.000 MHz and 28.300 MHz (the red portion), and may use SSB phone between 28.300 MHz and 28.500 MHz (that’s the yellow portion).

 

It turns out that there’s more bandplan structure beyond just what is in the ARRL chart, describing a consensus agreement about the ranges where repeater input and output frequencies fall, what frequencies are appropriate for FM simplex, etc.  For our region see the bandplan at https://www.wwara.org/WWARA_BAND_PLAN_2016_07_06.pdf

 

 

-p W7PFB
73, Don’t forget to smile and have fun!




Re: Brain fart ...

Dale Smith
 

Copy that!

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Robin Amundson
Sent: Sunday, December 29, 2019 8:53 AM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

Let's remember to include a more detailed explanation of this chart in our April technician class. I can include it in the operating chapters I present. (Remind me!)

 

73,

Robin WA7CPA

 

On Sun, Dec 29, 2019 at 8:50 AM Dale Smith <dale_smith@...> wrote:

You know, I’m thinking the charts on the band plan diagram have nothing to do with sidebands.  I get sidebands.  You have a carrier frequency and the upper side band is the upper portion of the frequency to the right of center frequency, and LSB is the other.  I am afraid I’ve over-thought this one.

 

Thanks for all this insights all!

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Dan Pflugrath
Sent: Saturday, December 28, 2019 11:01 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The standard convention for SSB is LSB below 10MHz and USB above 10 MHZ therefore use USB SSB on 10 meters.

 

(N,T) is the Novice and Technician allocation.  Novice class license's are no longer issued.

 

For the 10 meter Technician class (N,T) in the red portion you have CW, RTTY and data (including digital ft8 etc.) privileges from 28.0-28.3

For the 10 meter Technician class (N,T) in the yellow portion you have SSB from 28.3-28.5 privileges using USB.

 

Hope this helps.   Hope you study and go for your General Class License.

73  Dan KA7GPP

 

 

 

From: snovarc@snovarc.groups.io [mailto:snovarc@snovarc.groups.io] On Behalf Of Dale Smith
Sent: Saturday, December 28, 2019 9:32 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

 

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept? 

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Saturday, December 28, 2019 4:57 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

 

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

 

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

 

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

 

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

 

-p W7PFB
73, Don’t forget to smile and have fun!

 

On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

<image001.jpg>

Regards,

Dale Smith

425-686-9304

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

 



____________________________________________________________
74 Year Old Grandma Shocks Doctors: Forget Botox, Do This
removethewrinkles.com
http://thirdpartyoffers.juno.com/TGL3132/5e084f3dbb7044f3c75e9st01vuc
SponsoredBy Content.Ad


Re: Brain fart ...

Robin Amundson
 

Let's remember to include a more detailed explanation of this chart in our April technician class. I can include it in the operating chapters I present. (Remind me!)

73,
Robin WA7CPA

On Sun, Dec 29, 2019 at 8:50 AM Dale Smith <dale_smith@...> wrote:

You know, I’m thinking the charts on the band plan diagram have nothing to do with sidebands.  I get sidebands.  You have a carrier frequency and the upper side band is the upper portion of the frequency to the right of center frequency, and LSB is the other.  I am afraid I’ve over-thought this one.

 

Thanks for all this insights all!

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Dan Pflugrath
Sent: Saturday, December 28, 2019 11:01 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The standard convention for SSB is LSB below 10MHz and USB above 10 MHZ therefore use USB SSB on 10 meters.

 

(N,T) is the Novice and Technician allocation.  Novice class license's are no longer issued.

 

For the 10 meter Technician class (N,T) in the red portion you have CW, RTTY and data (including digital ft8 etc.) privileges from 28.0-28.3

For the 10 meter Technician class (N,T) in the yellow portion you have SSB from 28.3-28.5 privileges using USB.

 

Hope this helps.   Hope you study and go for your General Class License.

73  Dan KA7GPP

 

 

 

From: snovarc@snovarc.groups.io [mailto:snovarc@snovarc.groups.io] On Behalf Of Dale Smith
Sent: Saturday, December 28, 2019 9:32 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

 

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept? 

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Saturday, December 28, 2019 4:57 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

 

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

 

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

 

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

 

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

 

-p W7PFB
73, Don’t forget to smile and have fun!

 

On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

<image001.jpg>

Regards,

Dale Smith

425-686-9304

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

 



____________________________________________________________
74 Year Old Grandma Shocks Doctors: Forget Botox, Do This
removethewrinkles.com
http://thirdpartyoffers.juno.com/TGL3132/5e084f3dbb7044f3c75e9st01vuc
SponsoredBy Content.Ad


Re: Brain fart ...

Dale Smith
 

You know, I’m thinking the charts on the band plan diagram have nothing to do with sidebands.  I get sidebands.  You have a carrier frequency and the upper side band is the upper portion of the frequency to the right of center frequency, and LSB is the other.  I am afraid I’ve over-thought this one.

 

Thanks for all this insights all!

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Dan Pflugrath
Sent: Saturday, December 28, 2019 11:01 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The standard convention for SSB is LSB below 10MHz and USB above 10 MHZ therefore use USB SSB on 10 meters.

 

(N,T) is the Novice and Technician allocation.  Novice class license's are no longer issued.

 

For the 10 meter Technician class (N,T) in the red portion you have CW, RTTY and data (including digital ft8 etc.) privileges from 28.0-28.3

For the 10 meter Technician class (N,T) in the yellow portion you have SSB from 28.3-28.5 privileges using USB.

 

Hope this helps.   Hope you study and go for your General Class License.

73  Dan KA7GPP

 

 

 

From: snovarc@snovarc.groups.io [mailto:snovarc@snovarc.groups.io] On Behalf Of Dale Smith
Sent: Saturday, December 28, 2019 9:32 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

 

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept? 

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Saturday, December 28, 2019 4:57 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

 

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

 

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

 

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

 

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

 

-p W7PFB
73, Don’t forget to smile and have fun!

 

On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

<image001.jpg>

Regards,

Dale Smith

425-686-9304

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

 



____________________________________________________________
74 Year Old Grandma Shocks Doctors: Forget Botox, Do This
removethewrinkles.com
http://thirdpartyoffers.juno.com/TGL3132/5e084f3dbb7044f3c75e9st01vuc
SponsoredBy Content.Ad


Re: Brain fart ...

Paul Butzi (W7PFB)
 

On Dec 28, 2019, at 9:31 PM, Dale Smith <dale_smith@...> wrote:

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.
This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept?  
 

Yes, you’re mistaken.  I see how you are interpreting the upper half and lower half as upper sideband and lower sideband but that’s incorrect.

The upper half of that graphic (red and green, running from 28.000 to 29.700 MHz), is describing the privileges for licensee whose license is Amateur Extra, Advanced, or General, matching the letters E, A, G to the right 

The lower half of that graphic, (red and yellow, running from 28.000 to 28.500 MHz), is describing the privileges for licensees whose license class is Novice or Technician, matching the letters N, T to the right.  The notation “(200 W)” to the right indicates that novice and tech licensees are limited to 200  watts or less on the 10 meter band.

The color indicates what mode may be used, see the key on the right edge of the bandplan chart.

What the graphic is saying is that 
* Amateur Extra, Advanced, and General class licensees may use RTTY and data modes between 28.000MHz and 28.300 MHz (that’s the red portion of the upper half) , and may use phone and image modes (e.g. SSB voice, AM voice, SSTV, etc.) between 28.300MHz and 29.700 MHz (that’s the green portion).
* Novice and Technician class licensees may use RTTY and data modes between 28.000 MHz and 28.300 MHz (the red portion), and may use SSB phone between 28.300 MHz and 28.500 MHz (that’s the yellow portion).

It turns out that there’s more bandplan structure beyond just what is in the ARRL chart, describing a consensus agreement about the ranges where repeater input and output frequencies fall, what frequencies are appropriate for FM simplex, etc.  For our region see the bandplan at https://www.wwara.org/WWARA_BAND_PLAN_2016_07_06.pdf


-p W7PFB
73, Don’t forget to smile and have fun!


Re: Brain fart ...

Tim
 

I think you misunderstand what USB and LSB are.  They have nothing to do with the chart or any band plan.  Here is a link that may help. 


Also, sideband only applies to our AM bands. 


On Sat, Dec 28, 2019, 11:02 PM Dan Pflugrath <dpflugrath@...> wrote:

The standard convention for SSB is LSB below 10MHz and USB above 10 MHZ therefore use USB SSB on 10 meters.

 

(N,T) is the Novice and Technician allocation.  Novice class license's are no longer issued.

 

For the 10 meter Technician class (N,T) in the red portion you have CW, RTTY and data (including digital ft8 etc.) privileges from 28.0-28.3

For the 10 meter Technician class (N,T) in the yellow portion you have SSB from 28.3-28.5 privileges using USB.

 

Hope this helps.   Hope you study and go for your General Class License.

73  Dan KA7GPP

 

 

 

From: snovarc@snovarc.groups.io [mailto:snovarc@snovarc.groups.io] On Behalf Of Dale Smith
Sent: Saturday, December 28, 2019 9:32 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

 

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept? 

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Saturday, December 28, 2019 4:57 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

 

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

 

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

 

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

 

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

 

-p W7PFB
73, Don’t forget to smile and have fun!

 

On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

<image001.jpg>

Regards,

Dale Smith

425-686-9304

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

 



____________________________________________________________
74 Year Old Grandma Shocks Doctors: Forget Botox, Do This
removethewrinkles.com
http://thirdpartyoffers.juno.com/TGL3132/5e084f3dbb7044f3c75e9st01vuc
SponsoredBy Content.Ad


Re: Brain fart ...

Dan Pflugrath
 

The standard convention for SSB is LSB below 10MHz and USB above 10 MHZ therefore use USB SSB on 10 meters.

 

(N,T) is the Novice and Technician allocation.  Novice class license's are no longer issued.

 

For the 10 meter Technician class (N,T) in the red portion you have CW, RTTY and data (including digital ft8 etc.) privileges from 28.0-28.3

For the 10 meter Technician class (N,T) in the yellow portion you have SSB from 28.3-28.5 privileges using USB.

 

Hope this helps.   Hope you study and go for your General Class License.

73  Dan KA7GPP

 

 

 

From: snovarc@snovarc.groups.io [mailto:snovarc@snovarc.groups.io] On Behalf Of Dale Smith
Sent: Saturday, December 28, 2019 9:32 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

 

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept? 

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Saturday, December 28, 2019 4:57 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

 

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

 

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

 

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

 

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

 

-p W7PFB
73, Don’t forget to smile and have fun!

 

On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

<image001.jpg>

Regards,

Dale Smith

425-686-9304

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

 



____________________________________________________________
74 Year Old Grandma Shocks Doctors: Forget Botox, Do This
removethewrinkles.com
http://thirdpartyoffers.juno.com/TGL3132/5e084f3dbb7044f3c75e9st01vuc
SponsoredBy Content.Ad


Re: Brain fart ...

Dale Smith
 

The image file I attached in my email apparently didn’t make it.  So, if you look at the ARRL band plan for 10 Meters I see a red and green section label E, A, G and a small block below with red and yellow blocks label N and T.

This is where USB and LSB comes in.  For 10M I am assuming the blocks for E, A, and G are USB and the blocks below for N and T as LSB.  Am I mistaken in this concept? 

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Saturday, December 28, 2019 4:57 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Brain fart ...

 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

 

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

 

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

 

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

 

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

 

-p W7PFB
73, Don’t forget to smile and have fun!



On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

<image001.jpg>

Regards,

Dale Smith

425-686-9304

KJ7GHU

 

Reclaim your life and delete FaceBook!

 

 


Re: Brain fart ...

Paul Butzi (W7PFB)
 

I’m not sure where your confusion about USB, LSB, RTTY came in.  RTTY is just another digital mode.  USB = Upper Side Band, LSB = Lower Side Band, and are the two choices if you’re using Single Side Band (SSB) voice.  The convention is upper sideband from 14MHz and higher, and lower sideband below 14MHz. (exception: the convention is upper sideband when using the channelized 60m band, which is why those 60m channels are colored that funky blue on the ARRL chart)  

On 10m, Tech licensees have privileges from 28.000 MHz up through 28.5.  Everything 28.000-28.300 is RTTY and digital modes only.  Between 28.3 and 29.700 the bandplan allows for phone (aka SSB - Single Side Band).   There’s some confusing presentation here because the green color is specified as ‘phone and image’ in the key, and yellow is ’SSB phone’.  But the yellow color is just used to indicate that Novice and Tech class licensees are permitted to work between 28.300MHz and 28.500MHz but only using SSB voice.  So if you want to work, say, FT8 on 10m you need to be studying for your general ticket.

So if a Tech class licensee wants to use single side band voice on 10m, that licensee is good to go as long as he doesn’t go outside 28.300 MHz through 28.500 MHz (but remember not to let your sideband overlap the upper boundary, because on 10m the convention is to use upper side band, so if your dial is set to 28.400, for example, the upper reach of your bandwidth would fall above the 28.500 MHz boundary.)

On 6m, it doesn’t matter what your license class is, you’re good to go.  All license classes have the same priv’s on 6m, 2m, 70cm.

On 1.25m novices and techs can’t use the fixed digital message portion down between 219-220 MHz but between 222 and 225 MHZ the privs are the same for everyone.  So if your radio will work on 1.25m (aka 220) you’re free to use the newly fired up 220 repeaters!

-p W7PFB
73, Don’t forget to smile and have fun!

On Dec 28, 2019, at 4:23 PM, Dale Smith <dale_smith@...> wrote:

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I didthink that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …
 
<image001.jpg>
Regards,
Dale Smith
425-686-9304
KJ7GHU
 
Reclaim your life and delete FaceBook!
 


Brain fart ...

Dale Smith
 

So, I’m looking through the band plan to see what frequencies I can use as a Tech.  I see I have the 10M LSB open to me.  It least I did think that … The next band down is 6M and I think RTTY is USB and LSB is phone/image.  Then I look at 2 Meters and it’s like I lost my mind!  Do we use USB and LSB with 2M, 1.25M, 70cm, 33cm, and 23cm?  I hit an unexpected wall here.  Please clear me up …

 

Regards,

Dale Smith

425-686-9304

LinkedIn: linkedin.com/in/dalegsmith

KJ7GHU

 

Reclaim your life and delete FaceBook!

 


Re: Revision to 2020 Net Control Schedule

Rowland
 

I think the best way to do this list is once you have people that say that will do NC, assign them their dates in a standard rotation.  If when the time comes they are not available then someone else would/should step up and do the net for that date.   That is the simplest way to handle this situation.

 

Just my opinion.

 

Thank You,

 

Rowland

 

Rowland Brasch

K7RWB

SnoValley Amateur Radio Club (SnoVARC)

www.snovarc.org

SnoVARC Facebook

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Thursday, December 26, 2019 6:02 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] Revision to 2020 Net Control Schedule

 

Ok somehow I don’t feel like changing every single assignment qualifies as “fixing minor error”.

 

Before I go thru deleting all the dates I *was* down for net control, and adding all the dates I am NOW down for net control, and rearranging plans to have someone cover the dates I can’t actually cover, can we sort of decide on a schedule where we are not going to arbitrarily change *every single assignment*?

 

People (or, at least *me*) are trying to arrange to be in town to cover their dates, or have someone else cover for them, *in advance*.  I travel a fair bit, it would be a big help if the dates I was assigned did not get changed willy-nilly after I have already made arrangements.  Move a date in November next year, I don’t much care.  Move a date in January-May, well, if that’s going to happen all the time then perhaps sadly I need to not be on the list.

 

-p W7PFB
73, Don’t forget to smile and have fun!



On Dec 26, 2019, at 5:44 PM, Rick Burns <kb7cin@...> wrote:

 

Supersedes previous version (V1) released 2019-DEC-05.

 

This is V1.1. Minor update fixing error in the sequence.

 

Rick

<SnoVARC Net Control Assignments 2020 released 2019-DEC-26 V1-1.pdf>

 


Re: Revision to 2020 Net Control Schedule

Paul Butzi (W7PFB)
 

Ok somehow I don’t feel like changing every single assignment qualifies as “fixing minor error”.

Before I go thru deleting all the dates I *was* down for net control, and adding all the dates I am NOW down for net control, and rearranging plans to have someone cover the dates I can’t actually cover, can we sort of decide on a schedule where we are not going to arbitrarily change *every single assignment*?

People (or, at least *me*) are trying to arrange to be in town to cover their dates, or have someone else cover for them, *in advance*.  I travel a fair bit, it would be a big help if the dates I was assigned did not get changed willy-nilly after I have already made arrangements.  Move a date in November next year, I don’t much care.  Move a date in January-May, well, if that’s going to happen all the time then perhaps sadly I need to not be on the list.

-p W7PFB
73, Don’t forget to smile and have fun!

On Dec 26, 2019, at 5:44 PM, Rick Burns <kb7cin@...> wrote:

Supersedes previous version (V1) released 2019-DEC-05.
 
This is V1.1. Minor update fixing error in the sequence.
 
Rick
<SnoVARC Net Control Assignments 2020 released 2019-DEC-26 V1-1.pdf>


Revision to 2020 Net Control Schedule

Rick Burns
 

Supersedes previous version (V1) released 2019-DEC-05.

 

This is V1.1. Minor update fixing error in the sequence.

 

Rick

Kb7cin@...


Re: FW: 2019-12-25 03:36:02 UPDATED: (M6.3) Vancouver Island, Canada region 50.6 -130.0 (81a58)

Lindy KG7IFA
 

And remember that our January 2nd Elmer is all about emergency kits! 


Howard (WA1HEM) and Paul (W7PFB) will lead a session on 'Building Go Kits/Boxes’ from a newbie’s and veteran ham’s perspective.  Bring your go-box and winter go-bag for a fun and interactive show-and-tell.

Lindy, KG7IFA


-----Original Message-----
From: Rowland <k7rwb@...>
To: snovarc <snovarc@groups.io>
Sent: Wed, Dec 25, 2019 8:39 am
Subject: [SnoVARC] FW: 2019-12-25 03:36:02 UPDATED: (M6.3) Vancouver Island, Canada region 50.6 -130.0 (81a58)

Well this is one of many that have taken place north of us in the past week.  Is it an indicator of what might be coming here or just mother earth settling down a bit?  That is for you to decide.
 
Please make sure you are prepared.  Have a home and car emergency kits.  Once the holiday festivities have calmed down take the time to look over this FEMA site and make sure you are ready.
 
 
 
 
Thanks,
 
Rowland
 
From: USGS ENS <ens@...>
Sent: Tuesday, December 24, 2019 8:02 PM
To: slick56@...
Subject: 2019-12-25 03:36:02 UPDATED: (M6.3) Vancouver Island, Canada region 50.6 -130.0 (81a58)
 
M6.3 Earthquake - Vancouver Island, Canada region
Preliminary Report
Magnitude
6.3
Date-Time
·         25 Dec 2019 03:36:03 UTC
·         24 Dec 2019 18:36:03 near epicenter
·         24 Dec 2019 19:36:03 standard time in your timezone
Location
50.583N 129.999W
Depth
10 km
Distances
·         334.3 km (207.3 mi) WNW of Tofino, Canada
·         344.5 km (213.6 mi) W of Campbell River, Canada
·         371.4 km (230.3 mi) WNW of Courtenay, Canada
·         399.5 km (247.7 mi) W of Powell River, Canada
·         537.1 km (333.0 mi) WNW of Victoria, Canada
Location Uncertainty
Horizontal: 6.5 km; Vertical 1.8 km
Parameters
Nph = 194; Dmin = 207.8 km; Rmss = 1.04 seconds; Gp = 99°
Version =
Event ID
us 70006qt7
For updates, maps, and technical information
see: Event Page or USGS Earthquake Hazards Program
National Earthquake Information Center
U.S. Geological Survey


Disclaimer

This email was sent to slick56@...

You requested mail for events between -90.0/90.0 latitude and 180.0/-180.0 longitude (Default World)
for M6.0 between 08:00 and 20:00 and M6.5 other times.

To change your parameters, go to: https://earthquake.usgs.gov/ens
To unsubscribe, send a one-line reply to this message with: STOP slick56@...


Re: 1.25m/220MHz band

Rowland
 

Got my BTECH UV-5X3 HT for Christmas, programmed it with Tom and Paul’s repeater. Chatted with Paul on his repeater and did hear Tom’s repeater but no voice there. He was not home.

 

Rowland

 

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Wednesday, December 25, 2019 4:45 PM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] 1.25m/220MHz band

 

W7PFB 223.9 negative shift of 1.6MHz tone 88.5

WA7TBP 223.960 negative shift of 1.6MHz tone 123.0

 

-p W7PFB
73, Don’t forget to smile and have fun!



On Dec 25, 2019, at 4:23 PM, Rowland <k7rwb@...> wrote:

 

Please give both repeater frequencies again.

 

Thank You,

 

Rowland 

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Paul Butzi (W7PFB)
Sent: Wednesday, December 25, 2019 2:33 PM
To: snovarc@groups.io
Subject: [SnoVARC] 1.25m/220MHz band

 

We now have two repeaters in the Sno valley operating on the 1.25m/220MHz band.

 

I thought folks might be interested in the band so I’ve created a 220 directory in the files section for SNOVARC and put a spreadsheet there listing both HT’s and mobile radio options that offer 220 band operation.  The list is not exhaustive, so feel free to update it if you see something missing.  The column headed “eham” gives the average eham.net rating for that model, which is not super reliable in my view but probably offers some insight.

 

 

-p W7PFB
73, Don’t forget to smile and have fun!