Date   

Re: QSO Today Virtual HAM Expo 2021

Robin WA7CPA
 

Any idea where to find number to input to get in with their alternate route after the service denial attack?


Re: QSO Today Virtual HAM Expo 2021

Robin WA7CPA
 

Got into K4 presentation but can't get into next one. Basically I'm kicked out and even the replacement link isn't working.


Re: QSO Today Virtual HAM Expo 2021

Rowland
 

They are having challenges with the presentation software.  This is frustrating doing a local presentation.  Can't imagine doing an international one!



Thanks,

Rowland



On Sat, Mar 13, 2021 at 10:06 AM Paul Zoba <pezoba@...> wrote:
Great presentation of the K4. Can’t  wait!!!


On Mar 13, 2021, at 9:36 AM, Rowland <rowland.brasch@...> wrote:


Yes but some of it is working now.


Thanks,

Rowland



On Fri, Mar 12, 2021 at 8:56 PM Robin WA7CPA <wa7cpa@...> wrote:
Anyone else having trouble with the platform? Seems you can't get in without enabling camera and mic. Many comments in the feed indicate a massive fail.


Re: QSO Today Virtual HAM Expo 2021

Paul Zoba
 

Great presentation of the K4. Can’t  wait!!!


On Mar 13, 2021, at 9:36 AM, Rowland <rowland.brasch@...> wrote:


Yes but some of it is working now.


Thanks,

Rowland



On Fri, Mar 12, 2021 at 8:56 PM Robin WA7CPA <wa7cpa@...> wrote:
Anyone else having trouble with the platform? Seems you can't get in without enabling camera and mic. Many comments in the feed indicate a massive fail.


Re: QSO Today Virtual HAM Expo 2021

Rowland
 

Yes but some of it is working now.


Thanks,

Rowland



On Fri, Mar 12, 2021 at 8:56 PM Robin WA7CPA <wa7cpa@...> wrote:
Anyone else having trouble with the platform? Seems you can't get in without enabling camera and mic. Many comments in the feed indicate a massive fail.


Re: QSO Today Virtual HAM Expo 2021

Robin WA7CPA
 

Took 10 minutes to get in. Lots of silly nonsense going on. Went to Elecraft. Platform doesn't give seat at vendor tables without camera and mic. Left. Couldn't get back in. Guess it was because of the denial of service attack. 


Re: QSO Today Virtual HAM Expo 2021

Paul Zoba
 

I got in with mic and camera off. Wasn’t much to do yesterday. Looking forward to today’s sessions. 


On Mar 12, 2021, at 8:56 PM, Robin WA7CPA <wa7cpa@...> wrote:

Anyone else having trouble with the platform? Seems you can't get in without enabling camera and mic. Many comments in the feed indicate a massive fail.


Re: QSO Today Virtual HAM Expo 2021

Robin WA7CPA
 

Received email apologizing the event was under DDoS attack at start of event.


Re: QSO Today Virtual HAM Expo 2021

Robin WA7CPA
 

Anyone else having trouble with the platform? Seems you can't get in without enabling camera and mic. Many comments in the feed indicate a massive fail.


CDCCC Radio Communication Exercise - March 20th

Tom WA7TBP
 

SNOVAR members. Please see the attached information about a CDCCC CERT and SNOVARC exercise on March 20th. In addition, there is some information about the Code Red system as well. 
 
The exercise will be an informational gathering and radio net exercise.
 
If you have any questions, please don't hesitate to call me at home, 425-333-4833 or via e-mail, tomwa7tbp@....
 
Hope to see you at the exercise.
 
73,
 
Tom
 


From: no-reply@...
To: tomwa7tbp@...
Sent: 3/9/2021 22:52:15 Pacific Standard Time
Subject: CDCCC Radio Communication Exercise - March 20th

CDCCC will be hosting a radio communication exercise on Saturday March 20th. Please see the event flyer in the attachment link at the end of this email.

Other CDCCC news:
One of the largest ongoing complaints about the CodeRED system we use to send alerts to your phone is that the caller IDs come up weird. To help address this we have created a contact card (like a digital business card) and you can download it here: https://www.dropbox.com/s/w3n79ga3yv086ia/CodeRED%20Alerts.vcf?dl=0

If you don't want to download it, here are the numbers:
For text alerts, the message may come from 76993, 468311, or 76127.
For voice calls, the message may come from 855-969-4636 or 866-419-5000.
Since these numbers are shared by CDCCC and King County, we recommend the contact name "CodeRED Alerts".




Attachments:
Preview Unavailable For This File Extension
CDCCC_Radio_Communication_Exercise_2021_03_20_3_10_2021_1_51_20_AM.pdf


QSO Today Virtual HAM Expo 2021

Rowland
 

Don't forget this event starts Saturday and continues om Sunday. Should be a lot of fun and informative.  I attended last year and it was great.




Thanks,

Rowland


File Notifications #file-notice

snovarc@snovarc.groups.io Notification <noreply@...>
 

The following files have been deleted from the Files area of the snovarc@snovarc.groups.io group.

  • KE7GFZ IRLP and EchoLink How To rev 3-2019.docx

By: Ken Kosters <kenkosters@...>


The following files have been deleted from the Files area of the snovarc@snovarc.groups.io group.

  • EchoLink and IRLP

By: Ken Kosters <kenkosters@...>


Re: IC-7300 Major Update 140

Howard E. Mahran / WA1HEM
 

Haha! I’m looking forward to hearing the full blooper-reel version 😊

 

 

From: <snovarc@snovarc.groups.io> on behalf of Robin WA7CPA <wa7cpa@...>
Reply-To: <snovarc@snovarc.groups.io>
Date: Thursday, March 4, 2021 at 7:56 AM
To: <snovarc@snovarc.groups.io>
Subject: Re: [SnoVARC] IC-7300 Major Update 140

 

Problem solved. Another one for the blooper reel. That's all I'm willing to say. Sleep pays.

73,
Robin WA7CPA


--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: IC-7300 Major Update 140

Paul Zoba
 

LOL!  Good morning!


On Mar 4, 2021, at 7:56 AM, Robin WA7CPA <wa7cpa@...> wrote:

Problem solved. Another one for the blooper reel. That's all I'm willing to say. Sleep pays.

73,
Robin WA7CPA


Re: IC-7300 Major Update 140

Robin WA7CPA
 

Problem solved. Another one for the blooper reel. That's all I'm willing to say. Sleep pays.

73,
Robin WA7CPA


Re: IC-7300 Major Update 140

Robin WA7CPA
 

Setting up for the ARRL DX SSB contest this weekend. Monitor no longer seems to work. I cannot hear myself talk and I cannot hear my recorded macros. I did have good on air feedback from another ham who can hear my live voice and my recorded voice, and can't tell the difference between them. But I sure would like to be able to hear my macros. Has anyone else noticed monitor function not working since the update? Any ideas?

Thanks,
Robin, WA7CPA


SnoVARC Business Meeting and Elmer Session - Thu, 03/04/2021 6:15pm-8:00pm #cal-reminder

snovarc@snovarc.groups.io Calendar <snovarc@...>
 

Reminder: SnoVARC Business Meeting and Elmer Session

When: Thursday, 4 March 2021, 6:15pm to 8:00pm, (GMT-08:00) America/Los Angeles

Where:Zoom Meeting

View Event

Description:

Join Zoom Meeting
 
Meeting ID: 931 964 1698
Passcode: 3UJNed
One tap mobile
+12532158782,,9319641698#,,,,,,0#,,070760# US (Tacoma)
+13462487799,,9319641698#,,,,,,0#,,070760# US (Houston)
 
Dial by your location
        +1 253 215 8782 US (Tacoma)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Germantown)
Meeting ID: 931 964 1698
Passcode: 070760


Re: IC-7300 Major Update 140

Howard E. Mahran / WA1HEM
 

Nice. Thanks Paul! Looks like the updates on the 9700 apply here too

 

From: <snovarc@snovarc.groups.io> on behalf of Paul Zoba <pezoba@...>
Reply-To: <snovarc@snovarc.groups.io>
Date: Monday, March 1, 2021 at 11:10 AM
To: <snovarc@snovarc.groups.io>
Subject: Re: [SnoVARC] IC-7300 Major Update 140

 

https://youtu.be/Y5nsVfhe0MU


Here’s a video that discusses some of the updates. The first half is how to do the update so if you’re done already skip through it.


--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: IC-7300 Major Update 140

Paul Zoba
 

https://youtu.be/Y5nsVfhe0MU


Here’s a video that discusses some of the updates. The first half is how to do the update so if you’re done already skip through it.


Re: IC-7300 Major Update 140

Paul Zoba
 

This happens to me every time a Windows Update happens. It’s annoying...

Glad you found it!


On Feb 28, 2021, at 11:48 AM, Rowland <rowland.brasch@...> wrote:


I did have a major W10 software update to my laptop on Friday and then noticed the "no power issue" happening after that. I have checked to obvious settings as you mentioned and found one that had changed. Set it back to what it should be and now I have power output from the radio on USB-D.  Thanks for the hint Robin.


Thanks,

Rowland



On Sat, Feb 27, 2021 at 7:37 PM Robin WA7CPA <wa7cpa@...> wrote:
Rowland,
No power out on a data mode suggests to me incorrect line/mic settings. Did Windows revert your choice? Is the speaker setting still as original up?

Robin, WA7CPA 

On Sat, Feb 27, 2021, 7:20 PM Rowland <rowland.brasch@...> wrote:
To throw another hat in the ring.....my 7300 does not show any output power when doing winlink HF and the radio is set to USB-D.  Might be something silly but I am not sure.  Have power output on USB voice without the D (digital).  Thoughts?


Thanks,

Rowland



On Sat, Feb 27, 2021 at 2:14 PM Robin WA7CPA <wa7cpa@...> wrote:
All good now. Doing the actual update was about 5 minutes, not a big deal. I now have power out but I cannot tell you why I did not because it is a secret from me. Did a bunch of hocus pocus such as shutting down station and bringing it back, confirming my original settings were still there, improving SWR on the band,  and turning the Audio up to audible. At first no power on CW or FT8, but now it all works. Honestly I don't know why.

I discovered it when I tried to work South Sudan during a brief opening. He disappeared about the time I finally had power.

73,
Robin, WA7CPA

301 - 320 of 6622