|
[ARESLAX-Northeast] WL2K FAQ 6-24-2020 UPDATED
For those interested in Winlink here is an updated FAQ. Please see below.
Thanks,
Rowland
---------- Forwarded message ---------
From: Mike XE2/N6KZB <n6kzb@...>
Date: Thu, Jun 25, 2020 at 7:59
For those interested in Winlink here is an updated FAQ. Please see below.
Thanks,
Rowland
---------- Forwarded message ---------
From: Mike XE2/N6KZB <n6kzb@...>
Date: Thu, Jun 25, 2020 at 7:59
|
By
Rowland
·
#5600
·
|
|
Re: DMR Anytone Zoom invitation: Radio discount offer
Ann and I would both like to attend. Please let us know time.
Thank you
Peter
Peter M Marchel
206.940.5992
KJ7GHW
Ann and I would both like to attend. Please let us know time.
Thank you
Peter
Peter M Marchel
206.940.5992
KJ7GHW
|
By
Peter Marchel
·
#5599
·
|
|
Re: DMR Anytone Zoom invitation: Radio discount offer
If anyone is thinking of purchasing a digital mobile radio (DMR,) by attending the Zoom meeting offered by Jamie Hughes, there will be a link to purchasing a radio at a discount. I attended a previous
If anyone is thinking of purchasing a digital mobile radio (DMR,) by attending the Zoom meeting offered by Jamie Hughes, there will be a link to purchasing a radio at a discount. I attended a previous
|
By
Robin WA7CPA
·
#5598
·
|
|
DMR Anytone Zoom invitation
From: Jamie Hughes / WA7JH
Sent: Monday, June 22, 2020 5:02 PM
Subject: [KCARC] DMR Radio Programming Clinic - Friday 6/26/2020 @ 18:00
Good Monday Afternoon,
I’d like to offer a DMR radio
From: Jamie Hughes / WA7JH
Sent: Monday, June 22, 2020 5:02 PM
Subject: [KCARC] DMR Radio Programming Clinic - Friday 6/26/2020 @ 18:00
Good Monday Afternoon,
I’d like to offer a DMR radio
|
By
Robin WA7CPA
·
#5597
·
|
|
Re: Cougar Repeater Receive
Finally got the repeater to accept my DTMF today although I did nothing new.. must be my signal stregnth.
Recorded a pretty scratchy signal: 3 5. Running 50watts using Yaesu FTM 400dxr via a Jpole
Finally got the repeater to accept my DTMF today although I did nothing new.. must be my signal stregnth.
Recorded a pretty scratchy signal: 3 5. Running 50watts using Yaesu FTM 400dxr via a Jpole
|
By
Howard E. Mahran / WA1HEM
·
#5596
·
|
|
Re: Cougar Repeater Receive
Just do it manually. Less to worry about
Thanks,
Rowland
Just do it manually. Less to worry about
Thanks,
Rowland
|
By
Rowland
·
#5595
·
|
|
Re: Cougar Repeater Receive
Howard:
I have found it sometimes does not work for me as well. I think it's due to low signal level into the repeater.
Howard:
I have found it sometimes does not work for me as well. I think it's due to low signal level into the repeater.
|
By
Ralph Lease
·
#5594
·
|
|
Re: Cougar Repeater Receive
I have my Yeasu programmed with "123" DTMF - when I key-up I hear it being sent but I don't get a "ready" from the repeater. I must be doing something wrong or its being transmitted too fast for the
I have my Yeasu programmed with "123" DTMF - when I key-up I hear it being sent but I don't get a "ready" from the repeater. I must be doing something wrong or its being transmitted too fast for the
|
By
Howard E. Mahran / WA1HEM
·
#5593
·
|
|
Re: Cougar Repeater Receive
Announce on air that you are going to do a test. Say your call sign then say testing, then while the mic is keyed push 123 then release PTT. The repeater will say "ready". You then push PTT and say
Announce on air that you are going to do a test. Say your call sign then say testing, then while the mic is keyed push 123 then release PTT. The repeater will say "ready". You then push PTT and say
|
By
Rowland
·
#5592
·
|
|
Re: Cougar Repeater Receive
1. Ensure you have your radio configured to send DTMF
2. tune radio to the SNOVARC repeater in question
3. Hold down the PTT and dial 123 on the keypad
4. Release PTT. The repeater should respond
1. Ensure you have your radio configured to send DTMF
2. tune radio to the SNOVARC repeater in question
3. Hold down the PTT and dial 123 on the keypad
4. Release PTT. The repeater should respond
|
By
Paul Butzi (W7PFB)
·
#5591
·
|
|
Re: Cougar Repeater Receive
Newbie needs help... Can you explain the process? I have sent the DTMF code 123 on key-up. Do I unkey, wait, and then key-up and test?
--
*************************
Howard E. Mahran
WA1HEM
(425) 864
Newbie needs help... Can you explain the process? I have sent the DTMF code 123 on key-up. Do I unkey, wait, and then key-up and test?
--
*************************
Howard E. Mahran
WA1HEM
(425) 864
|
By
Howard E. Mahran / WA1HEM
·
#5590
·
|
|
Re: Cougar Repeater Receive
I just did a recording test on the repeater at 50 watts and what I heard had lots of white noise. I am at 550' and should sound much better.
Thanks,
Rowland
I just did a recording test on the repeater at 50 watts and what I heard had lots of white noise. I am at 550' and should sound much better.
Thanks,
Rowland
|
By
Rowland
·
#5589
·
|
|
Cougar Repeater Receive
Re-posting Ken's message on snovarc, as I don't have write permissions to KE7GFZ on groups.io...
The DVR Readback test is called by DTMF: 123
I checked cougar repeater receive via the DVR readback at
Re-posting Ken's message on snovarc, as I don't have write permissions to KE7GFZ on groups.io...
The DVR Readback test is called by DTMF: 123
I checked cougar repeater receive via the DVR readback at
|
By
W7ABD
·
#5588
·
|
|
Possible Novelty Hill Closure
Hello,
Please be aware that Novelty Hill may be closed at the end of June for slide repairs. See the following from KC website:
Novelty Hill Road Closure End of June
Roadway and hillside repair
Hello,
Please be aware that Novelty Hill may be closed at the end of June for slide repairs. See the following from KC website:
Novelty Hill Road Closure End of June
Roadway and hillside repair
|
By
Rowland
·
#5587
·
|
|
Fw: Our remote VE session are starting . . . we could use some help.
From: Ronald Poole <snwbird1111@...>
Sent: Monday, June 15, 2020 9:04 AM
Subject: Fwd: Our remote VE session are starting . . . we could use some help.
---------- Forwarded message ---------
From:
From: Ronald Poole <snwbird1111@...>
Sent: Monday, June 15, 2020 9:04 AM
Subject: Fwd: Our remote VE session are starting . . . we could use some help.
---------- Forwarded message ---------
From:
|
By
Irvina Mizell
·
#5586
·
|
|
Re: ISS chirp programming
Rob, I've seen that too. I will try that.
Thanks.
Rob, I've seen that too. I will try that.
Thanks.
|
By
Devlin Crose
·
#5585
·
|
|
Re: ISS chirp programming
I have an old file that has a negative offset of 1.31 rather than the 0.6 you have. You might try that if you want to talk and are having problems. I have never tried it, so I can’t say whether it
I have an old file that has a negative offset of 1.31 rather than the 0.6 you have. You might try that if you want to talk and are having problems. I have never tried it, so I can’t say whether it
|
By
Bob Otis
·
#5584
·
|
|
ISS chirp programming
Hi Everyone:
Looking for some help?
I'm trying to program my baofeng BFF8+ to QSO the ISS.
I'm attaching a screen shot to what I've input into the CHIRP interface.
I'm not too much of a pro - so
Hi Everyone:
Looking for some help?
I'm trying to program my baofeng BFF8+ to QSO the ISS.
I'm attaching a screen shot to what I've input into the CHIRP interface.
I'm not too much of a pro - so
|
By
Devlin Crose
·
#5583
·
|
|
6m FM 52.50 simplex test
Anyone available to test 6m FM at 52.50 right now. Would love to know where I'm hitting and a signal report.
73,
Robin, WA7CPA
Anyone available to test 6m FM at 52.50 right now. Would love to know where I'm hitting and a signal report.
73,
Robin, WA7CPA
|
By
Robin WA7CPA
·
#5582
·
|
|
Re: Interference
Nicely done!
By
Paul Zoba
·
#5581
·
|