1. Ensure you have your radio configured to send DTMF 2. tune radio to the SNOVARC repeater in question 3. Hold down the PTT and dial 123 on the keypad 4. Release PTT. The repeater should respond

Newbie needs help... Can you explain the process? I have sent the DTMF code 123 on key-up. Do I unkey, wait, and then key-up and test? -- ************************* Howard E. Mahran WA1HEM (425) 864

I just did a recording test on the repeater at 50 watts and what I heard had lots of white noise. I am at 550' and should sound much better. Thanks, Rowland

Re-posting Ken's message on snovarc, as I don't have write permissions to KE7GFZ on groups.io... The DVR Readback test is called by DTMF: 123 I checked cougar repeater receive via the DVR readback at

Hello, Please be aware that Novelty Hill may be closed at the end of June for slide repairs. See the following from KC website: Novelty Hill Road Closure End of June Roadway and hillside repair

From: Ronald Poole <snwbird1111@...> Sent: Monday, June 15, 2020 9:04 AM Subject: Fwd: Our remote VE session are starting . . . we could use some help. ---------- Forwarded message --------- From:

Rob, I've seen that too. I will try that. Thanks.

I have an old file that has a negative offset of 1.31 rather than the 0.6 you have. You might try that if you want to talk and are having problems. I have never tried it, so I can’t say whether it

Hi Everyone: Looking for some help? I'm trying to program my baofeng BFF8+ to QSO the ISS. I'm attaching a screen shot to what I've input into the CHIRP interface. I'm not too much of a pro - so

Anyone available to test 6m FM at 52.50 right now. Would love to know where I'm hitting and a signal report. 73, Robin, WA7CPA

Nicely done!

Good RF Detective work there Paul! Sounds like you nailed it down for sure... Jim W7ABD

I think I’ve got this nailed down. I was wrong about the signal width. On the waterfall it looks to be about as wide as a normal signal. But it is very clearly digital. So. Close examination

I don’t know about anyone else but I am hearing this intermittently, still. Today I hooked an SDR and took a look. I had expected to see a pretty wide signal, spread from maybe 146.4 up to

Definitely, and I have a zoom account so no time or number of people participating Peter Peter Marchel, Esq. JD, MBA, CDR, ARM, RPLU, CPCU, AIC, AIM, AIS President / Principal 12262 337th PL

Is there interest in me holding a Zoom meeting sometime(s) to show Baofeng owners how to field program? (Not during club meeting, just an extra, one-on-one okay). I must say, I have a renewed UHV/VHF

Thanks Rowland! The Baofeng UV5R Short Cut in the link you sent is perfect for lamination! *********************************** Howard Mahran WA1HEM@... (425)

As I have stated before it is very important to know how to manually program your rados. Software is a great tool but when you do not have access to it and need to program a frequency or repeater

Thank you – I still need to figure out how to program our radios. Peter Peter M Marchel 206.940.5992 KJ7GHW

Came across this site that has a lot of cheat sheets for programming radios. https://www.ke4rx.org/cheatsheet/ Thanks, Rowland