Date   

Re: Elmer ideas

@lostrouter
 

I'd be interested in learning about bpq.  I'm starting to play around with TARPN, TNCs and raspberry pi.

--Michael KJ7NVA


Elmer ideas

Howard E. Mahran / WA1HEM
 

Now that field day is past, I thought it might be interesting to list ideas for Elmer classes. Here are several ideas that Kirt (K7KDW) and I discussed today:

1) psk31 set up, volume calibration, etiquette and macros.

2) Rig grounding in your shack Including how to if an outside 8ft grounding rod is not available

3) Tracking down and eliminating rouge RF noise in your shack/house 

4)  Winlink set up including peer to peer for EmComm purposes

What are other topics you’d be interested in?




--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Winlink W7PFB-10 and W7PFB-11 / Mistakes

Shawn / K7ATA
 

You mentioned BPQ again; I'm sending my next therapy bill to you.

--Shawn
--K7ATA

On 6/26/2020 11:29 AM, Paul Butzi (W7PFB) wrote:
Last Sunday Tom WA7TBP alerted me to a problem with W7PFB-11 where it was allowing connections but reporting it could not connect to a CMS.

Rebooting the Raspberry Pi that hosts W7PFB-11 did not solve the problem. Further, I could not SSH into the Raspberry Pi to try to diagnose the problem, and until this morning I had no free time to do more than desultory debugging.

This morning I first tackled the problem in earnest. After a bunch of dorking around I finally realized that all of the other computers that route through one specific 100Base-T switch also seemed to have no connectivity to the internet (or, indeed, to any of the rest of my home network.) This took me an embarrassingly long time to discover (more than an hour of head scratching).

So I checked on the switch, which was essentially hidden in the bottom drawer of a locked filing cabinet in a disused lavatory with a sign on the door reading “Beware of the Leopard”. The switch was alive in the sense that the power LED was illuminated but dead in the sense that it was not routing packets. Power cycling the switch changed the switch from “mostly dead” to “working but now highly suspect and not to be trusted”.

Anyway, the RMS station W7PFB-11 now appears to be working fine. When I get a moment I will order a replacement switch and also route the wiring for the rack so that it goes directly to my main switch instead of going higgledy-piggely thru some indeterminate number of switches.

Memo to self: it does not help if you have backup power at the equipment rack to keep the RMS station running, and backup power at the main switch and network link to keep that running, if your traffic from the RMS will be routed through a switch that is not connected to some sort of backup power! Bad Paul! No biscuit!

Eventually W7PFB-10 will be restored to service but not until I screw up my courage to wrestle with BPQ configuration again. Shawn K7ATA will attest to the horrors that lurk there.

-p W7PFB
73, Don’t forget to smile and have fun!




Re: Winlink W7PFB-10 and W7PFB-11 / Mistakes

Howard E. Mahran / WA1HEM
 

I think we have a new monthly award - :”The Snovarc Hammy - for the biggest “Duh!” of the month!”  LOL

On Jun 26, 2020, at 11:36 AM, Robin Amundson <wa7cpa@...> wrote:

Ham Pulitzer Prize Paul!

73,
Robin, WA7CPA 

On Fri, Jun 26, 2020, 11:29 AM Paul Butzi (W7PFB) <w7pfb@...> wrote:
Last Sunday Tom WA7TBP alerted me to a problem with W7PFB-11 where it was allowing connections but reporting it could not connect to a CMS.

Rebooting the Raspberry Pi that hosts W7PFB-11 did not solve the problem.  Further, I could not SSH into the Raspberry Pi to try to diagnose the problem, and until this morning I had no free time to do more than desultory debugging.

This morning I first tackled the problem in earnest.  After a bunch of dorking around I finally realized that all of the other computers that route through one specific 100Base-T switch also seemed to have no connectivity to the internet (or, indeed, to any of the rest of my home network.)  This took me an embarrassingly long time to discover (more than an hour of head scratching).

So I checked on the switch, which was essentially hidden in the bottom drawer of a locked filing cabinet in a disused lavatory with a sign on the door reading “Beware of the Leopard”.  The switch was alive in the sense that the power LED was illuminated but dead in the sense that it was not routing packets.  Power cycling the switch changed the switch from “mostly dead” to “working but now highly suspect and not to be trusted”.

Anyway, the RMS station W7PFB-11 now appears to be working fine.  When I get a moment I will order a replacement switch and also route the wiring for the rack so that it goes directly to my main switch instead of going higgledy-piggely thru some indeterminate number of switches.  

Memo to self: it does not help if you have backup power at the equipment rack to keep the RMS station running, and backup power at the main switch and network link to keep that running, if your traffic from the RMS will be routed through a switch that is not connected to some sort of backup power! Bad Paul!  No biscuit!

Eventually W7PFB-10 will be restored to service but not until I screw up my courage to wrestle with BPQ configuration again.  Shawn K7ATA will attest to the horrors that lurk there.

-p W7PFB
73, Don’t forget to smile and have fun!






***********************************
Howard Mahran
(425) 864-5104
***********************************





--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Winlink W7PFB-10 and W7PFB-11 / Mistakes

Robin Amundson
 

Ham Pulitzer Prize Paul!

73,
Robin, WA7CPA 

On Fri, Jun 26, 2020, 11:29 AM Paul Butzi (W7PFB) <w7pfb@...> wrote:
Last Sunday Tom WA7TBP alerted me to a problem with W7PFB-11 where it was allowing connections but reporting it could not connect to a CMS.

Rebooting the Raspberry Pi that hosts W7PFB-11 did not solve the problem.  Further, I could not SSH into the Raspberry Pi to try to diagnose the problem, and until this morning I had no free time to do more than desultory debugging.

This morning I first tackled the problem in earnest.  After a bunch of dorking around I finally realized that all of the other computers that route through one specific 100Base-T switch also seemed to have no connectivity to the internet (or, indeed, to any of the rest of my home network.)  This took me an embarrassingly long time to discover (more than an hour of head scratching).

So I checked on the switch, which was essentially hidden in the bottom drawer of a locked filing cabinet in a disused lavatory with a sign on the door reading “Beware of the Leopard”.  The switch was alive in the sense that the power LED was illuminated but dead in the sense that it was not routing packets.  Power cycling the switch changed the switch from “mostly dead” to “working but now highly suspect and not to be trusted”.

Anyway, the RMS station W7PFB-11 now appears to be working fine.  When I get a moment I will order a replacement switch and also route the wiring for the rack so that it goes directly to my main switch instead of going higgledy-piggely thru some indeterminate number of switches. 

Memo to self: it does not help if you have backup power at the equipment rack to keep the RMS station running, and backup power at the main switch and network link to keep that running, if your traffic from the RMS will be routed through a switch that is not connected to some sort of backup power! Bad Paul!  No biscuit!

Eventually W7PFB-10 will be restored to service but not until I screw up my courage to wrestle with BPQ configuration again.  Shawn K7ATA will attest to the horrors that lurk there.

-p W7PFB
73, Don’t forget to smile and have fun!





Winlink W7PFB-10 and W7PFB-11 / Mistakes

Paul Butzi (W7PFB)
 

Last Sunday Tom WA7TBP alerted me to a problem with W7PFB-11 where it was allowing connections but reporting it could not connect to a CMS.

Rebooting the Raspberry Pi that hosts W7PFB-11 did not solve the problem. Further, I could not SSH into the Raspberry Pi to try to diagnose the problem, and until this morning I had no free time to do more than desultory debugging.

This morning I first tackled the problem in earnest. After a bunch of dorking around I finally realized that all of the other computers that route through one specific 100Base-T switch also seemed to have no connectivity to the internet (or, indeed, to any of the rest of my home network.) This took me an embarrassingly long time to discover (more than an hour of head scratching).

So I checked on the switch, which was essentially hidden in the bottom drawer of a locked filing cabinet in a disused lavatory with a sign on the door reading “Beware of the Leopard”. The switch was alive in the sense that the power LED was illuminated but dead in the sense that it was not routing packets. Power cycling the switch changed the switch from “mostly dead” to “working but now highly suspect and not to be trusted”.

Anyway, the RMS station W7PFB-11 now appears to be working fine. When I get a moment I will order a replacement switch and also route the wiring for the rack so that it goes directly to my main switch instead of going higgledy-piggely thru some indeterminate number of switches.

Memo to self: it does not help if you have backup power at the equipment rack to keep the RMS station running, and backup power at the main switch and network link to keep that running, if your traffic from the RMS will be routed through a switch that is not connected to some sort of backup power! Bad Paul! No biscuit!

Eventually W7PFB-10 will be restored to service but not until I screw up my courage to wrestle with BPQ configuration again. Shawn K7ATA will attest to the horrors that lurk there.

-p W7PFB
73, Don’t forget to smile and have fun!


July 2 SnoVarc Zoom Meeting: Your "National Geographic" Ham Radio sheltering entertainment evening--do not miss this one!

Robin Amundson
 

Elmer: VP8PJ South Orkney DXpedition on Signy Island

Hear the first-hand account of the DXpedition to South Orkney in the Antarctic on the Braveheart six days at sea each way from our local DXpeditioner, Rob Fanfant, N7QT. The team left the old world just ahead of the coronavirus outbreak, but experiencing civil unrest in Puntas Arenas Chile before their ship departed, a foreshadow of what was to come in the US. The VP8PJ team successfully experienced extreme weather and near super-human physical challenges setting up camp while making hams all over the world happy with record-breaking QSO’s from Signy Island. They returned to a completely different world, barely getting home on nearly empty airplanes ahead of the travel restrictions. This is a ham radio adventure tale you will not want to miss.

7 p.m. Thursday July 2



Re: Are Bioenno Batteries worth their price?

GARY DENSOW
 

  • Bioenno Power battery is thermally and chemically stable
  • A Bioenno Power battery is dependable and reliable without the possibility of lithium fires
  • Bioenno Power battery is 50% to 70% lighter than a traditional SLA (sealed lead acid) battery
  • Bioenno Power battery allows for extraction of >80-90% of the rated capacity, whereas an SLA battery only allows for 50% of the rated capacity
  • A Bioenno Power product has a service life of 2000+ charge cycles at 5-10+ years with a shelf life that far exceeds the service life of many other batteries  


Gary Densow

AF7TZ

Fall City, Wa.

425-281-2287

garydensow@...


From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> on behalf of Robin Amundson <wa7cpa@...>
Sent: Thursday, June 25, 2020 10:11 AM
To: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io>
Subject: Re: [SnoVARC] Are Bioenno Batteries worth their price?
 
YES!!!!!!!!!!!!!!!!!!!!!!!

On Thu, Jun 25, 2020 at 9:27 AM Howard E. Mahran / WA1HEM <wa1hem@...> wrote:
?
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: DMR Anytone Zoom invitation: Radio discount offer

Robin Amundson
 

The time is THIS FRIDAY at 1800 local. Yes, right before FD the next morning. But everyone has already tested and setup will be a snap Saturday morning, right?


Re: DMR Anytone Zoom invitation: Radio discount offer

Robin Amundson
 

I was not at the fire station. Jamie Hughes is going to talk about how to set up a radio and will answer any other questions, I believe. The discount is available only through Jamie as far as I know. He is a very nice and accessible guy.

Robin, WA7CPA

On Thu, Jun 25, 2020 at 9:26 AM Howard E. Mahran / WA1HEM <wa1hem@...> wrote:
Will this online session be similar to the one we had at the fire station? I'm interested in the 578. 
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Are Bioenno Batteries worth their price?

Robin Amundson
 

YES!!!!!!!!!!!!!!!!!!!!!!!


On Thu, Jun 25, 2020 at 9:27 AM Howard E. Mahran / WA1HEM <wa1hem@...> wrote:
?
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Are Bioenno Batteries worth their price?

Howard E. Mahran / WA1HEM
 

?
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: DMR Anytone Zoom invitation: Radio discount offer

Howard E. Mahran / WA1HEM
 

Will this online session be similar to the one we had at the fire station? I'm interested in the 578. 
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: DMR Anytone Zoom invitation: Radio discount offer

Rowland
 

Depending on the date I am interested in attending.


Thanks,

Rowland



On Thu, Jun 25, 2020 at 7:02 AM Robin Amundson <wa7cpa@...> wrote:
If anyone is thinking of purchasing a digital mobile radio (DMR,) by attending the Zoom meeting offered by Jamie Hughes, there will be a link to purchasing a radio at a discount. I attended a previous Zoom presentation at the WWDXC meeting and got the discount on the mobile station, which I have yet had time to set up. I will be on this Zoom presentation. The discount is a good one. I will not publish the link here but if you want the link to the discount for SnoVarc members, please email me ASAP, per Jamie's permission. The link is not to be published on social media. I got my radio promptly by mail after ordering. The discounted radios are:

AT-D878UV+ (Portable)

AT-D578UV Pro, (Mobile)

There has been some informal discussion among some SnoVarc members about whether it is time to upgrade our repeater to a Hyterra that can do DMR and analog. There are definite benefits to adding the digital feature. For one thing, even technician class licensees will be able to access worldwide talk groups as well as local special interest talk groups. Repeater pairs are maxed out in Western Washington. There is a move to convert repeaters to digital, which will increase capacity for pairs, accommodating more repeaters. 

Our repeater is experiencing some problems as we have all noticed. I believe we may also be able to access a discount by Hyterra. Now is the time as a club to figure out our next steps.

Anyway, here is the link as posted in the previous post. Don't be shy about calling Jamie if you have questions:

All are welcome though, come learn about the programming tricks before you take the plunge into DMR if you’d like.

 

Here is the zoom link and an invite is soon to follow:

https://us02web.zoom.us/j/83779961979

 Jamie Hughes

WA7JH

Phone: (360) 362-4575


Posted here by Robin, WA7CPA
wa7cpa@...


[ARESLAX-Northeast] WL2K FAQ 6-24-2020 UPDATED

Rowland
 

For those interested in Winlink here is an updated FAQ.  Please see below.


Thanks,

Rowland



---------- Forwarded message ---------
From: Mike XE2/N6KZB <n6kzb@...>
Date: Thu, Jun 25, 2020 at 7:59 AM
Subject: [ARESLAX-Northeast] WL2K FAQ 6-24-2020 UPDATED
To: <main@areslax-northeast.groups.io>


Frequently Asked Questions (FAQ) about Winlink 2000

 

(Revised June 24, 2020)

 

Mixture of an Instruction Manual, Fact Book, Help desk

Material from various Winlink 2000 User Groups, and others.

 

Please send new and revised material to Don   K7BFL at  gmail dot com

 

[use the “Find” feature of Adobe Acrobat to locate needed information]

                                                                                       Click to go to Winlink Book of Knowledge to download the PDF


Re: DMR Anytone Zoom invitation: Radio discount offer

Peter Marchel
 

Ann and I would both like to attend.  Please let us know time.

 

Thank you

 

Peter

 

Peter M Marchel

206.940.5992

KJ7GHW

 

 

 

From: snovarc@snovarc.groups.io <snovarc@snovarc.groups.io> On Behalf Of Robin Amundson
Sent: Thursday, June 25, 2020 7:02 AM
To: snovarc@snovarc.groups.io
Subject: Re: [SnoVARC] DMR Anytone Zoom invitation: Radio discount offer

 

If anyone is thinking of purchasing a digital mobile radio (DMR,) by attending the Zoom meeting offered by Jamie Hughes, there will be a link to purchasing a radio at a discount. I attended a previous Zoom presentation at the WWDXC meeting and got the discount on the mobile station, which I have yet had time to set up. I will be on this Zoom presentation. The discount is a good one. I will not publish the link here but if you want the link to the discount for SnoVarc members, please email me ASAP, per Jamie's permission. The link is not to be published on social media. I got my radio promptly by mail after ordering. The discounted radios are:

AT-D878UV+ (Portable)

AT-D578UV Pro, (Mobile)

There has been some informal discussion among some SnoVarc members about whether it is time to upgrade our repeater to a Hyterra that can do DMR and analog. There are definite benefits to adding the digital feature. For one thing, even technician class licensees will be able to access worldwide talk groups as well as local special interest talk groups. Repeater pairs are maxed out in Western Washington. There is a move to convert repeaters to digital, which will increase capacity for pairs, accommodating more repeaters. 

Our repeater is experiencing some problems as we have all noticed. I believe we may also be able to access a discount by Hyterra. Now is the time as a club to figure out our next steps.

Anyway, here is the link as posted in the previous post. Don't be shy about calling Jamie if you have questions:

All are welcome though, come learn about the programming tricks before you take the plunge into DMR if you’d like.

 

Here is the zoom link and an invite is soon to follow:

https://us02web.zoom.us/j/83779961979

 Jamie Hughes

WA7JH

Phone: (360) 362-4575


Posted here by Robin, WA7CPA
wa7cpa@...


Re: DMR Anytone Zoom invitation: Radio discount offer

Robin Amundson
 

If anyone is thinking of purchasing a digital mobile radio (DMR,) by attending the Zoom meeting offered by Jamie Hughes, there will be a link to purchasing a radio at a discount. I attended a previous Zoom presentation at the WWDXC meeting and got the discount on the mobile station, which I have yet had time to set up. I will be on this Zoom presentation. The discount is a good one. I will not publish the link here but if you want the link to the discount for SnoVarc members, please email me ASAP, per Jamie's permission. The link is not to be published on social media. I got my radio promptly by mail after ordering. The discounted radios are:

AT-D878UV+ (Portable)

AT-D578UV Pro, (Mobile)

There has been some informal discussion among some SnoVarc members about whether it is time to upgrade our repeater to a Hyterra that can do DMR and analog. There are definite benefits to adding the digital feature. For one thing, even technician class licensees will be able to access worldwide talk groups as well as local special interest talk groups. Repeater pairs are maxed out in Western Washington. There is a move to convert repeaters to digital, which will increase capacity for pairs, accommodating more repeaters. 

Our repeater is experiencing some problems as we have all noticed. I believe we may also be able to access a discount by Hyterra. Now is the time as a club to figure out our next steps.

Anyway, here is the link as posted in the previous post. Don't be shy about calling Jamie if you have questions:

All are welcome though, come learn about the programming tricks before you take the plunge into DMR if you’d like.

 

Here is the zoom link and an invite is soon to follow:

https://us02web.zoom.us/j/83779961979

 Jamie Hughes

WA7JH

Phone: (360) 362-4575


Posted here by Robin, WA7CPA
wa7cpa@...


DMR Anytone Zoom invitation

Robin Amundson
 

From: Jamie Hughes / WA7JH
Sent: Monday, June 22, 2020 5:02 PM
Subject: [KCARC] DMR Radio Programming Clinic - Friday 6/26/2020 @ 18:00

 

Good Monday Afternoon,

 

I’d like to offer a DMR radio programming clinic again. I’m offering it this Friday evening, yes I know, it’s the night before Field Day starts. 😊

 

This is a clinic where you are encouraged to actually program your radio during the clinic. That means you are able to ask questions as we progress.

The programming procedure will be:

  1. Entering your own ID(s)
  2. Entering talkgroup/group call ID(s)
  3. Building Channels
  4. Building Zones.

 

I cannot help you with computer issues during this session. I am willing to help you before or after the meeting if needed.

 

All are welcome though, come learn about the programming tricks before you take the plunge into DMR if you’d like.

 

Here is the zoom link and an invite is soon to follow:

https://us02web.zoom.us/j/83779961979

 

 

Jamie Hughes

WA7JH

Phone: (360) 362-4575


Re: Cougar Repeater Receive

Howard E. Mahran / WA1HEM
 

Finally got the repeater to accept my DTMF today although I did nothing new.. must be my signal stregnth.

Recorded a pretty scratchy signal:  3 5.  Running 50watts using Yaesu FTM 400dxr via a Jpole from 2nd story-  QTH  is at an elevation of 500ft. 
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************


Re: Cougar Repeater Receive

Rowland
 

Just do it manually.  Less to worry about


Thanks,

Rowland



On Fri, Jun 19, 2020 at 12:36 PM Howard E. Mahran / WA1HEM <wa1hem@...> wrote:
I have my Yeasu programmed with "123" DTMF - when I key-up I hear it being sent but I don't get a "ready" from the repeater. I must be doing something wrong or its being transmitted too fast for the repeater.  I did get it to work several months ago the same way when Kirt and I were testing mic gains. Dont know what it wont work now... Scratching my head.
--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************