Date   
Re: Video recording of steaming

Ken Kosters
 

Thanks all,

Ken W7ECK 

On Nov 19, 2019, at 6:23 AM, Mark Kenworthy <mark@...> wrote:

Screen capturing is going to reduce the quality a good amount.  Doesn’t she have the ability to download the videos from the site?

 

Mark

 

From: snovarc@groups.io <snovarc@groups.io> On Behalf Of Ken Kosters via Groups.Io
Sent: Monday, November 18, 2019 8:59 PM
To: snovarc@groups.io
Subject: [snovarc] Video recording of steaming

 

Hi all,

Not HAM related in any scope of the imagination but know we have some that might be able to help with this.

My Niece has video streaming service for workouts and being young she signed up and videos are about to expire without further payment. My question is the best way to capture these and put them on the hard drive with little or no expense?

I will dive into this latter when given time and was just hoping for a simple cost effective answer as it could apply to other things one day.

Ken W7ECK

Re: Video recording of steaming

Mark Kenworthy
 

Screen capturing is going to reduce the quality a good amount.  Doesn’t she have the ability to download the videos from the site?

 

Mark

 

From: snovarc@groups.io <snovarc@groups.io> On Behalf Of Ken Kosters via Groups.Io
Sent: Monday, November 18, 2019 8:59 PM
To: snovarc@groups.io
Subject: [snovarc] Video recording of steaming

 

Hi all,

Not HAM related in any scope of the imagination but know we have some that might be able to help with this.

My Niece has video streaming service for workouts and being young she signed up and videos are about to expire without further payment. My question is the best way to capture these and put them on the hard drive with little or no expense?

I will dive into this latter when given time and was just hoping for a simple cost effective answer as it could apply to other things one day.

Ken W7ECK

Re: Video recording of steaming

Dan Pflugrath
 

Ken

A free video screen capture program that I have used some time ago is Apowersoft Free Screen Recorder

 

Another program I recently used is Prism Video File Converter.

Good Luck

 

73,

Dan KA7GPP

 

 

 

 

From: snovarc@groups.io [mailto:snovarc@groups.io] On Behalf Of Ken Kosters
Sent: Monday, November 18, 2019 8:59 PM
To: snovarc@groups.io
Subject: [snovarc] Video recording of steaming

 

Hi all,

Not HAM related in any scope of the imagination but know we have some that might be able to help with this.

My Niece has video streaming service for workouts and being young she signed up and videos are about to expire without further payment. My question is the best way to capture these and put them on the hard drive with little or no expense?

I will dive into this latter when given time and was just hoping for a simple cost effective answer as it could apply to other things one day.

Ken W7ECK



____________________________________________________________
Drink 1 Cup Before Bed, Watch Your Body Fat Melt Like Crazy
Celebrity Local
http://thirdpartyoffers.juno.com/TGL3132/5dd3913b468dc113a4afast01vuc
SponsoredBy Content.Ad

Re: Video recording of steaming

Howard E. Mahran / WA1HEM
 

Ken,

You could use screen capture software such as Screenium (mac) or similar on PC saved as a movie file (mpeg4,mov, Avi, etc)

Howard

Excuse my typos - sent via my thumbs or by voice from a mobile device

On Nov 18, 2019, at 8:58 PM, Ken Kosters <kenkosters@...> wrote:

Hi all,

Not HAM related in any scope of the imagination but know we have some that might be able to help with this.

My Niece has video streaming service for workouts and being young she signed up and videos are about to expire without further payment. My question is the best way to capture these and put them on the hard drive with little or no expense?

I will dive into this latter when given time and was just hoping for a simple cost effective answer as it could apply to other things one day.

Ken W7ECK

--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************

Video recording of steaming

Ken Kosters
 

Hi all,

Not HAM related in any scope of the imagination but know we have some that might be able to help with this.

My Niece has video streaming service for workouts and being young she signed up and videos are about to expire without further payment. My question is the best way to capture these and put them on the hard drive with little or no expense?

I will dive into this latter when given time and was just hoping for a simple cost effective answer as it could apply to other things one day.

Ken W7ECK

Re: UHF repeater radio test - FREQUENCY CORRECTION

Howard E. Mahran / WA1HEM
 

That explains the silence! Thanks Paul!! 

Excuse my typos - sent via my thumbs or by voice from a mobile device

On Nov 16, 2019, at 10:27 AM, Paul Butzi (W7PFB) <w7pfb@...> wrote:

The test repeater is actually on 440.000/445.000

-p W7PFB
73, Don’t forget to smile and have fun!

Begin forwarded message:

From: "Lynn Burlingame" <n7cfo@...>
Subject: RE: [snovarc] UHF repeater radio test
Date: November 16, 2019 at 10:19:15 AM PST
To: "'Paul Butzi \(w7pfb\)'" <w7pfb@...>
Cc: "Tom Needham" <TOMWA7TBP@...>

That is a typo that did not get caught.  It is in the SNP freq 440.000/445.000.
 
Can you broadcast the correction?
 
Tnx
 
Lynn


--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************

UHF repeater radio test - FREQUENCY CORRECTION

Paul Butzi (W7PFB)
 

The test repeater is actually on 440.000/445.000

-p W7PFB
73, Don’t forget to smile and have fun!

Begin forwarded message:

From: "Lynn Burlingame" <n7cfo@...>
Subject: RE: [snovarc] UHF repeater radio test
Date: November 16, 2019 at 10:19:15 AM PST
To: "'Paul Butzi \(w7pfb\)'" <w7pfb@...>
Cc: "Tom Needham" <TOMWA7TBP@...>

That is a typo that did not get caught.  It is in the SNP freq 440.000/445.000.
 
Can you broadcast the correction?
 
Tnx
 
Lynn

UHF repeater radio test

Tom WA7TBP
 

Good evening everyone:

Sorry for the short notice on this, but I just learned of this test Thursday night.

Lynn Burlingame, N7CFO, has built a portable UHF repeater. He would like to test it tomorrow, Saturday, Nov 16. The test will be conducted from 1:00 PM to 3:00 PM. The repeater is on 440.500 MHz, Plus 5 MHz shift, Transmit tone is 88.5 Hz. The repeater is near the WSP Office in Eastgate. (Bellevue). Please call Lynn, N7CFO to make a contact.  He would appreciate an e-mail from you with the following information:

    * Radio make and model
    * Power output
    * Antenna type
    * Antenna height
    * The street address where you made the contact
    * Signal report

This repeater is located at Lynn's house and the test is simulating a failure of the main mountain top repeaters that we have around here.

I hope you can help Lynn with this test. Thank you in advance for helping out.

73,

Tom, WA7TBP

Re: December 5 6 p.m. Ixtapa RSVP if you haven't already

Robin Amundson
 

Our 6 p.m. reservation time was confirmed with Ixtapa this evening. If you can't get there by 6, don't sweat it. 
73,
Robin, WA7CPA

Re: December 5 6 p.m. Ixtapa RSVP if you haven't already

Kathy K7KJB
 

Please disregard this comment.

 

Kathy

 

From: Kathy Brasch <kb1@...>
Sent: Friday, November 15, 2019 10:23 AM
To: 'snovarc@groups.io' <snovarc@groups.io>
Subject: RE: [snovarc] December 5 6 p.m. Ixtapa RSVP if you haven't already

 

Can you update the calendar to show this starting at 6 pm instead of 6:30?

 

Kathy

 

From: snovarc@groups.io <snovarc@groups.io> On Behalf Of Robin Amundson
Sent: Friday, November 15, 2019 8:44 AM
To: snovarc@groups.io
Subject: [snovarc] December 5 6 p.m. Ixtapa RSVP if you haven't already

 

Our SnoVARC annual December dinner at Ixtapa Redmond Ridge is reserved for 6 p.m. Thursday, December 5. Order off the menu. There are a few seats left on the current reservation. Now is the time to make a commitment if you haven't already. It is order off the menu and pay your own ticket.

Note: The reservation IS for 6:00, not 6:30. If this is a challenge for too many people I will change it with the restaurant. For now it is 6 p.m.

Please respond here or shoot me an email.

73,
Robin Amundson, WA7CPA
wa7cpa@...

Re: December 5 6 p.m. Ixtapa RSVP if you haven't already

Kathy K7KJB
 

Can you update the calendar to show this starting at 6 pm instead of 6:30?

 

Kathy

 

From: snovarc@groups.io <snovarc@groups.io> On Behalf Of Robin Amundson
Sent: Friday, November 15, 2019 8:44 AM
To: snovarc@groups.io
Subject: [snovarc] December 5 6 p.m. Ixtapa RSVP if you haven't already

 

Our SnoVARC annual December dinner at Ixtapa Redmond Ridge is reserved for 6 p.m. Thursday, December 5. Order off the menu. There are a few seats left on the current reservation. Now is the time to make a commitment if you haven't already. It is order off the menu and pay your own ticket.

Note: The reservation IS for 6:00, not 6:30. If this is a challenge for too many people I will change it with the restaurant. For now it is 6 p.m.

Please respond here or shoot me an email.

73,
Robin Amundson, WA7CPA
wa7cpa@...

Re: December 5 6 p.m. Ixtapa RSVP if you haven't already

Tom WA7TBP
 

Robin:

Thanks for organizing this. 6:00 PM works for me. I will see you there.

Tom

In a message dated 11/15/2019 08:44:15 Pacific Standard Time, wa7cpa@... writes:

Our SnoVARC annual December dinner at Ixtapa Redmond Ridge is reserved for 6 p.m. Thursday, December 5. Order off the menu. There are a few seats left on the current reservation. Now is the time to make a commitment if you haven't already. It is order off the menu and pay your own ticket.

Note: The reservation IS for 6:00, not 6:30. If this is a challenge for too many people I will change it with the restaurant. For now it is 6 p.m.

Please respond here or shoot me an email.

73,
Robin Amundson, WA7CPA
wa7cpa@...

Re: December 5 6 p.m. Ixtapa RSVP if you haven't already

Howard E. Mahran / WA1HEM
 

Confirming Carolyn and I will be there

On Nov 15, 2019, at 8:44 AM, Robin Amundson <wa7cpa@...> wrote:

Our SnoVARC annual December dinner at Ixtapa Redmond Ridge is reserved for 6 p.m. Thursday, December 5. Order off the menu. There are a few seats left on the current reservation. Now is the time to make a commitment if you haven't already. It is order off the menu and pay your own ticket.

Note: The reservation IS for 6:00, not 6:30. If this is a challenge for too many people I will change it with the restaurant. For now it is 6 p.m.

Please respond here or shoot me an email.

73,
Robin Amundson, WA7CPA
wa7cpa@...


--
*************************
Howard E. Mahran
WA1HEM
(425) 864 - 5104
*************************

December 5 6 p.m. Ixtapa RSVP if you haven't already

Robin Amundson
 

Our SnoVARC annual December dinner at Ixtapa Redmond Ridge is reserved for 6 p.m. Thursday, December 5. Order off the menu. There are a few seats left on the current reservation. Now is the time to make a commitment if you haven't already. It is order off the menu and pay your own ticket.

Note: The reservation IS for 6:00, not 6:30. If this is a challenge for too many people I will change it with the restaurant. For now it is 6 p.m.

Please respond here or shoot me an email.

73,
Robin Amundson, WA7CPA
wa7cpa@...

Re: IC 7300 Users Guide Book

Rowland
 

I downloaded it for free???

 

Here is the site with the real URL

 

https://smile.amazon.com/Radio-Today-guide-Icom-IC-7300-ebook/dp/B07RTZ914Z/ref=sr_1_1?keywords=ic+7300+kindle&qid=1573485478&sr=8-1

 

Thank You,

 

Rowland Brasch

 

Rowland Brasch

K7RWB

SnoValley Amateur Radio Club (SnoVARC)

www.snovarc.org

SnoVARC Facebook

 

From: snovarc@groups.io <snovarc@groups.io> On Behalf Of W7ABD
Sent: Sunday, November 10, 2019 10:52 AM
To: snovarc@groups.io
Subject: Re: [snovarc] IC 7300 Users Guide Book

 

Hi Roland,

I could not get the tinyURL link to work - cross scripting error...

Assuming you are referring to: "The Radio Today guide to the Icom IC-7300" by Andrew Barron.

Looks like nice guide to the 7300.  It's not free however...  Kindle price is: $9.50 and Paperback version is: $13.51.  Of course if you pay the Kindle Unlimited Membership fee, then you can read it for "free" until your membership expires...

Think I will get the paperback version.  Will be nice addition to my other radio manuals...

Thanks for the tip!

Jim
W7ABD

On 11/10/19 09:44, Rowland wrote:

For those of you that have the IC7300 radio please read.  I found this book on Amazon.com.  So far I find it an easy read with lots of help for IC7300 users. It is free if you have a Kindle or Kindle app on your pad.
The URL is long so I reduced it using "TinyURL.com".
https://tinyurl.com/yfuoqgpd

Rowland

 

Re: IC 7300 Users Guide Book

W7ABD
 

Hi Roland,

I could not get the tinyURL link to work - cross scripting error...

Assuming you are referring to: "The Radio Today guide to the Icom IC-7300" by Andrew Barron.

Looks like nice guide to the 7300.  It's not free however...  Kindle price is: $9.50 and Paperback version is: $13.51.  Of course if you pay the Kindle Unlimited Membership fee, then you can read it for "free" until your membership expires...

Think I will get the paperback version.  Will be nice addition to my other radio manuals...

Thanks for the tip!

Jim
W7ABD


On 11/10/19 09:44, Rowland wrote:
For those of you that have the IC7300 radio please read.  I found this book on Amazon.com.  So far I find it an easy read with lots of help for IC7300 users. It is free if you have a Kindle or Kindle app on your pad.
The URL is long so I reduced it using "TinyURL.com".
https://tinyurl.com/yfuoqgpd

Rowland

Re: IC 7300 Users Guide Book

Rowland
 

Here is the site for the free Kindle program for PC or Apple

https://www.amazon.com/b?ie=UTF8&node=16571048011

IC 7300 Users Guide Book

Rowland
 

For those of you that have the IC7300 radio please read.  I found this book on Amazon.com.  So far I find it an easy read with lots of help for IC7300 users. It is free if you have a Kindle or Kindle app on your pad.
The URL is long so I reduced it using "TinyURL.com".
https://tinyurl.com/yfuoqgpd

Rowland

Re: Video: A simple guide to electronic components.

Paul Butzi (W7PFB)
 

Excellent video.

Side note: worth watching just for the accent. You’ll feel like you’re getting an electronics lesson in a pastry shop in Caernarfon. It makes me want to order coffee and a meat pie.

-p W7PFB
73, Don’t forget to smile and have fun!

On Nov 2, 2019, at 6:08 PM, Shawn / K7ATA <shawn@...> wrote:

Reaching back to our presentation on basic electronics, I thought I'd share a video from one of my youtube favorites, Big Clive. (warning, melodious welsh accent ahead)

https://www.youtube.com/watch?v=6Maq5IyHSuc

--
--Shawn
--K7ATA



Video: A simple guide to electronic components.

Shawn / K7ATA
 

Reaching back to our presentation on basic electronics, I thought I'd share a video from one of my youtube favorites, Big Clive. (warning, melodious welsh accent ahead)

https://www.youtube.com/watch?v=6Maq5IyHSuc

--
--Shawn
--K7ATA